Home|Parts
  • Replacement sensor for the Series 1300 and Series 1000 Oxygen Deficiency Monitors. Standard Lead time to Ship, (days ARO): 3-5
  • Calibration Fixture with mounting nut, for the Series 1000 or 1300 Oxygen Deficiency Monitor. Standard Lead time to Ship, (days ARO): 3-5
  • 24 VDC sample pump outfitted with barbed fittings on both the sample inlet and outlet suitable for use with 1/4" OD (1/8" ID) mounted on the rear of the Series 2000, 2500, or 2510 instruments.  For applications with sample pressure < 0.3 psig and > -2 psig, or if the sample Inlet-to-Outlet pressure differential is < 0.3 psig. Standard Lead time to Ship, (days ARO): 3-5
  • Replacement Percent Oxygen Sensor for Series 2000, 2500, 2510 analyzers & transmitters Standard Lead time to Ship, (days ARO): 3-5
  • Two (2) AC powered (115 VAC) solenoid valves installed on the sample gas inlet and outlet used to isolate the oxygen sensor. The valves have been wired to an internally mounted terminal strip to provide the user with the ability to wire an external ON/OFF switch (supplied by user). If the analyzer has been equipped with an optional sample pump, the terminal strip will be configured so that an external ON/OFF pump switch (customer supplied) can be used.  For order with Series 3000 and 3520 analyzers and Series 3500 and 3510 transmitters only. Standard Lead time to Ship, (days ARO): 3-6
  • 3SEN (Replacement Trace Oxygen Sensor for Series 3000, 3500, and 3510 analyzers and transmitters) Standard Lead time to Ship, (days ARO): 3-5
  • FLMC - Flowmeter with Integral Flow Control Needle Valve. (For Series 2000, 2500, 2510, 2520, 3000, 3500, 3510, 3520) Standard Lead time to Ship (days ARO): 3-5
  • Swagelok - High Capacity Sample Filter- 316 stainless steel (SS) body with 316 SS filter element. Recommended when particles are >5 microns. The filter is equipped with 1/4" compression fittings. (Replaces Old PN: 295S, 395S – if replacing in an existing setup check that SWAGELOK is indicated on the side fo the filter housing) Standard Lead time to Ship, (days ARO): 3-5
  • Swagelok - Spare Filter Elements - SS-4TF-2 Standard Lead time to Ship, (days ARO): 3-5
  • Rugged horn & strobe for indoor or outdoor use rated NEMA 4 (IP 66). Horn volume adjustable up to 113 dB output. Strobe has amber cover with a 1 Hz flash rate-40,000 candle power strobe. The annunciator derives its power from the Series 1000/2000 electronics. The horn and strobe comes with ten (10) feet of cable. Standard Lead time to Ship, (days ARO): 3-5
  • Replacement sensor for the OXY-SEN Oxygen Monitor (for both models-OXY-SEN-1F and OXY-SEN-2F). Standard Lead time to Ship, (days ARO): 3-5
  • Horn & strobe specially designed for the Series 1300 Oxygen Deficiency Monitor to allow for full user control over the Horn and/or Strobe outputs separately, allowing for any combination of Horn and/or Strobe outputs per alarm, up to 9 alarms. The horn volume is adjustable up to 113 dB output. The strobe has an amber cover with a 1 Hz flash rate-40,000 candle power strobe. The device derives its power directly from the Series 1300 electronics. Also included is 10 feet (3 meters) of cable to interconnect and draw power from the monitor. Can also be optionally used as a standalone Horn & Strobe. NOTE: A MAXIMUM OF FOUR HORN & STROBES CAN BE POWERED FROM THE SERIES 1300 OXYGEN DEFICIENCY MONITOR. For a maximum of 8 Horn & Strobes, an external power source is required. Standard Lead time to Ship, (days ARO): 1-3