||Series 2510 Percent Oxygen Transmitter

Series 2510 Percent Oxygen Transmitter

$1,595.00

Series 2510 Percent Oxygen Transmitter with a single range of 0-25%. Input power is 24 VDC (supplied by customer). An analog output of 0-10 VDC is provided.

Modifications include the following:

  1. Supply Alpha Omega Instruments’ standard 1/4″ OD quick connect gas fittings.
  2. Machine the same holes normally used to accept Alpha Omega Instruments’ strain relief connectors. In this case, do not supply the connectors, just the machined holes.
  3. Increase the number of internal electrical connections so that negative 24 VDC is accessible from two terminals.
  4. Provide a positive 24 VDC terminal at the end of the terminal strip and label it “P” to be used to power a 24 VDC pump that will be supplied by CVP.

*pictured with optional equipment

For a full list of product Specifications and Resources click here.

Standard Lead time to Ship, (weeks ARO): 3-4

SKU: 2510-D1XXXX-CVP Category:

Description

Overview

Wide Number of Ranges

Measure from <0.1% to 100% Oxygen

Exceptional Speed of Response

Responds Instantaneously to Changes in Oxygen

Rugged and Versatile Construction

NEMA 4 Housing Withstands Harsh Environments

Economically Priced

Save Thousands of Dollars vs Other Methods

Patented Extended Life Sensor

Eliminates Frequent Sensor Replacement

Acid Gas Resistant Sensor

Eliminates Sample Conditioning for Many Applications

PERFORMANCE

  • Measurement Ranges in Percent 0-2, 0-5, 0-10, 0-25, 0-50, and 0-100
  • Accuracy¹: + 1% of full scale. ¹Stated at constant pressure and constant temperature 
  • Linearity: + 1% of full scale.
  • Response Time: 90% of full scale in less than 20 seconds (typical).
  • Sensor Type: Long-life Electrochemical Sensor.
  • Temperature Compensation: Standard.
  • Operating Temperature Range: 40° to 104°F (5° to 40°C)
  • Warranty: Two years for the electronics and one year for the sensor.

ELECTRICAL

  • Series 2500 Loop Powered Trace Oxygen Transmitter Input power 14-32 VDC
  • Series 2510 Trace Oxygen Transmitter: Input power 115/230 VAC, 50-60 Hz, or 24 VDC.
  • Loop Resistance: 600 ohms @ 24 VDC (consult factory for other resistance values)

SAMPLE GAS CHARACTERISTICS

  • Sample Flow Rate: 1.0 to 2.0 standard cubic feet per hour (SCFH) 0.5 to 1.0 liters/ minute (LPM)
  • Sample Gas Pressure Limits: 0.1 to 1.5 psig (0.007 to 0.1 kg/cm2)

CONSTRUCTION

  • Enclosure: Polycarbonate, rated NEMA 4X (IP66) without optional equipment. NEMA 7 (explosion proof) optional.
  • Dimensions: 6.5 in. (165.1 mm) height 7.0 in. (177.8 mm) width 3.9 in.(99.06 mm) depth. Note: All dimensions are without optional equipment
  • Gas Connections: Quick connect 1/4” OD for plastic tubing or stainless steel compression fittings for installations with metal sample lines.

The Series 2510 Percent Oxygen Transmitter is an AC powered (115/230 VAC, 50-60 Hz) percent oxygen transmitter designed to provide accurate and dependable percent oxygen measurements in a variety of background gases.  Measurement ranges available are from 0-2% to 0-100%. The Series 2510 enclosure is made from durable polycarbonate, and is rated for NEMA 4 (IP 66) service (may change with the addition of certain optional equipment).  A 4-20 mADC output is provided that can be used with a data logger, recorder, PLC, DCS, etc. Options include pressure regulators, flow meters, sample filters, and explosion proof (NEMA 7) housings.

The Series 2510 Percent Oxygen Transmitter features an extended life oxygen sensor with EES (enhanced electrolyte system). This sensor provides exceptional performance, accuracy, and stability. For applications where carbon dioxide is present in the sample gas, the EES retards passivation of the sensor anode by allowing the products of oxidation to dissolve in the electrolyte. In effect, the sensor is renewed continuously, resulting in an increase in sensor life even if exposed to 100%  carbon dioxide. In addition, the enhanced mechanical design of the sensor ensures longer life, and virtually eliminates leakage of electrolyte, a nagging (and expensive) problem associated with sensors that require periodic electrolyte maintenance.

Additional information

Weight 13 lbs
Dimensions 20 × 15 × 9 in
The AOI website uses cookies to ensure you get the best experience. By using this site you consent to our Privacy Policy. Got it!