Home|Oxygen Analyzer|ZrO2000 Fast Response Oxygen Analyzer

ZrO2000 Fast Response Oxygen Analyzer

$5,500.00

ZrO2000 Fast Response Oxygen Analyzer with a measuring range of 0.1 PPM to 100%. Input voltage 90-264 VAC, 50-60Hz. Two scalable analog outputs are provided, 4-20 mADC and 0-20 mADC. Included is a easy to read, six digit backlit LCD as well as two (2) SPDT Form C contacts rated 10A @ 30VDC/115/240 VAC. Note: It is essential that the metal sample tubing used to connect to the ZRO2000 be of oxygen service quality (no residual oils or particles on the inner surfaces). In addition, the sample gas should not contain any reducing gases such as any hydrocarbon based gases, carbon monoxide, or hydrogen. Gases such as these can introduce significant error into the oxygen readings. If those gases are present, Alpha Omega Instruments does have alternative sensor technology to offer.

  • Advanced Solid State Sensor
  • Measures parts PPM to 100% oxygen
  • Non-depleting oxygen sensor
  • 24 bit processing digital technology
  • Responds in milliseconds

For a full list of product Specifications and Resources click here.

Standard Lead time to Ship, (weeks ARO): 3-4

SKU: ZRO2 Category:

Description

Overview

Advanced Solid State Sensor
Provides High Precision Oxygen Measurements
Measures PPB to 100%
One Instrument Does It All
Response in Milliseconds
Provides Exceptional Tracking of Process Conditions.
Non-depleting Sensor
Designed to Provide Years of Operation
User Scalable Analog Outputs
Better Defines the Concentration Range of Interest
Dual User Adjustable Alarms
Set Critical Process Limits
Microprocessor Controller
Helps to Ensure Dependable and Accurate Readings
Built-in Sample By-Pass gas
Helps to promote rapid transport of the sample gas

PERFORMANCE

  • Measurement Ranges: 0% to 100%
  • Accuracy: Percent: ±2% of reading or 0.05% absolute whichever is greater. Trace: ±2% of reading or ±0.5ppm absolute whichever is greater.
    • NOTE: The sample gas used with the ZRO2000 must not contain any hydrocarbon vapors, hydrogen, carbon monoxide, or other reducing gases. Sample tubing should be cleaned for oxygen service. Please consult the factory for additional information.
  • Response Time: < 5 seconds at 0.15 liters per minute (LPM) over 1 decade. The response time for measurements of less than 50 PPM or less depend to a great extent on the design of the sample delivery system including the materials used.
  • Sensor Type: Zirconium Oxide
  • Operating Temperature of Analyzer: 50° to 104°F (10° to 40°C)
  • Warranty: Two Years Electronics, One Year Sensor

ELECTRICAL

  • Display: 0.7″ (17.8 mm) high 6 digit liquid crystal display
  • Resolution: 0.01 on highest reading & 0.001 ppm on lowest reading
  • Input Power: Universal 90-264 VAC, 50 or 60 Hz
  • Standard Outputs: (2) Selectable 0-20 mA DC or 4-20 mA DC, both scalable by user
  • Oxygen Alarm Relays: Two (2) SPDT Form C contacts rated 10 A @ 30V DC /115/230 VAC. Alarms may be cleared manually or automatically, by user selection.
  • Audible Alarm: Internal audible alarm
  • Audible Alarm: Cancel Front panel switch

SAMPLE GAS CHARACTERISTICS

  • Maximum Sample Temperature: 122°F (50°C)
  • Maximum Sample Pressure: 0.1 to 0.5 pounds per square inch gauge (PSIG) (0.007 to 0.035 kg/cm2).
  • Sample Gas Moisture Limits: 85% RH

CONSTRUCTION

  • Enclosure: Aluminum, rated NEMA 1.
  • Enclosure Dimensions: 13 inches (330 mm) – length 10.71 inches (272 mm) – width 6.3 inches (160 mm) – height Note: All dimensions are without optional equipment
  • Gas Connections: 1/4” stainless steel compression fittings.

Documents

Close

Close

 | Size: 902 KB 9th Nov 2018 Zirconia Oxygen Analyzer (ZrO2000) Manual  | Size: 402 KB 11th Jul 2018 Datasheet ZRO2000  | Size: 236 KB 11th Jul 2018 Product Configurator ZRO2000
Next »Page 1 of « Prev

Alpha Omega Instruments’ The ZRO2000 FAST Response Zirconia Oxygen Analyzer is designed to provide accurate and repeatable trace and percent oxygen measurements in a variety of gases.  Oxygen readings from parts per billion to 100% can be achieved with one instrument. The rugged and compact design of the ZRO2000 FAST Response Oxygen Analyzer makes it ideally suited for industrial applications where continuous oxygen measurements are required.

The Series ZRO2000 Fast Response Oxygen Analyzer is a microprocessor based instrument designed to measure gas phase oxygen concentrations over a range of 0-100%, and it exhibits fast response times resulting from the non-depleting zirconia oxygen sensor used in the Series ZRO2000 Fast Response Oxygen Analyzer is a zirconia type that exhibits fast response times. The analyzer is housed in a NEMA 1 enclosure rated for general purpose use. The front panel contains five switches that provide access to the analyzer’s settings. Oxygen values are displayed on a 0.7″(17.8 mm) high 6 digit liquid crystal display (LCD). The instrument is equipped with two oxygen alarm relays. Both relays are Form C (SPDT) types rated at 10 amps at 115/230 VAC/ 30 VDC and are user configurable for fail-safe operation. In addition to the alarm relays, the Series ZRO2000 Fast Response our Zirconia Oxygen Analyzer has a built-in audible alarm and red LEDs for visual indication of an oxygen alarm condition. There are also two green LEDs to indicate whether the LCD is displaying parts per million (PPM) or percent (%). The audible alarm may be manually canceled at anytime. If the audible alarm is canceled and the alarm event continues, indications of this condition will still be available through the front panel LEDs and relay contact(s). Two flow meters are standard equipment for the Series ZRO2000 Fast Response Oxygen Analyzer, one for the “Sample Flow” and another for the “Bypass Flow”.

The Series ZRO2000 ​Fast Response Zirconia Oxygen Analyzer comes equipped with two standard analog outputs. These can be configured for 0-20mADC or 4-20 mADC separately. Both are scalable by the user. The analyzer accepts a universal input of 90VAC to 264VAC @ 50-60Hz. The Series ZRO2000 ​Fast Response Oxygen Analyzer incorporates standard features that make it suitable for many applications. However, for certain requirements, the user may desire to augment the capabilities of the instrument by equipping it with a sample pump or pressure regulator.

Made in the USA

The Series ZRO2000 is priced competitively with other manufacturers, and it is manufactured as well as quality control tested here in the United States. In fact, our product quality is emphasized throughout the manufacturing process starting with raw material vendor surveys through final assembly, testing, and system calibration. We’ve also earned an exceptional reputation for presale and after-market support for over 25 years.

Additional information

Weight 14 lbs
Dimensions 20 × 16 × 14 in

Related products

© Copyright  Alpha Omega Instruments Corp., 40 Albion Road, Suite 100, Lincoln, RI 02865
USA Toll-Free 800.262.5977 Local 401.333.8580 | Privacy Policy | Pricing listed is for online orders only. Custom quote pricing can be different. We reserve the right to change pricing at any time.
The AOI website uses cookies to ensure you get the best experience. By using this site you consent to our Privacy Policy. Got it!